Anti-lock Brake Heat Shield

A stainless steel heat shield with additional high temperature insulation applied. It is designed to eliminate transfer of catalytic converter heat to the anti-lock system electronics that reside only inches away.

  • Price: $48.99

GM Ball Mount Hitch

GM Ball Mount Hitch

This is a brand new GM P/N 15110022 Hitch Insert / Ball Mount. The original manufacturer (Oris) still builds them under GM license. Price includes a Hitch Storage Bag and shipping in the continental US.

  • Price: $398.00

Sinister Kustoms Dropped & Tucked Running Board Brackets

Sinister Kustoms Dropped & Tucked Running Board Brackets

This set of six brackets will lower the running boards approx 2" and tuck them into the body by approx 2".  OEM brackets shown for reference only.

  • Price: $270.00

SSR 4-bolt Rear Crossmember

SSR 4-bolt Rear Crossmember

This is a VERY rigid steel drop-in replacement for the wimpy single tube OEM SSR/TBSS crossmember. Both are shown for comparison. Made in Phoenix, AZ by skilled technicians. Shipping in the Continental USA is about $27.

  • Price: $110.00

SSR Air Shock Kit

SSR Air Shock Kit

This air shock kit is for all SSRs and is especially intended for all lowered SSRs.  The shock absorbers are made in the USA.  This kit is fully compatible with all stock and aftermarket SSR suspension components.

  • Price: $125.00

SSR Front Fascia Stabilizer Kit

SSR Front Fascia Stabilizer Kit

This is two sets of brackets for the front fascia that will eliminate the fog light "bounce" on the SSR.  They attache to the fascia behind each fog light and to the rear bolt of the lower radiator support.

  • Price: $70.79

SSR Front License Plate Mount

SSR Front License Plate Mount

This is a complete system for installing a front license plate that requires no drilling and does not contact the outside of the fascia.  It has a hidden frame mounting system that allows for removal of the license plate in only one minute.

  • Price: $125.00

Urethane Front Control Arm Bushings

Urethane Front Control Arm Bushings

Prothane's polyurethane is a firmer bushing than the O.E. This increases bushing life, handling performance and alignment longevity.

  • Price: $82.00

Urethane Rear Control Arm Bushings

Urethane Rear Control Arm Bushings

Prothane's polyurethane is a firmer bushing than the O.E. This increases bushing life and handling performance.

  • Price: $132.00

Urethane Rear Panhard Bar Bushings

This urethane bushing is in development. Estimated availability is April 2017.

  • Price: $0.00

SSR Lower Radiator Support

SSR Lower Radiator Support

This is a VERY rigid steel drop-in replacement for the black nylon OEM part (15120741). Both are shown for comparison. Made in Phoenix, AZ by skilled technicians. The price of shipping to anywhere in the USA is one cent.

  • Price: $207.99

SSR Replacement Air Dam

SSR Replacement Air Dam

This replacement Air dam fits into the stock position with (included) OEM fasteners.  It's designed to blend with the curves of the truck and be as inconspicuous as possible while increasing radiator airflow.

  • Price: $34.45

Bilstein Shock Absorbers (front pair)

Bilstein Shock Absorbers (front pair)

These Bilstein 4600 Series Struts are an adaptation of the ones designed as an aftermarket part for the Trailblazer chassis. These are an improved version of the OEM Bilsteins. This price is for a pair.

  • Price: $225.45

Bilstein Shock Absorbers (rear pair)

Bilstein Shock Absorbers (rear pair)

These Bilstein 4600 Series Shock Absorbers were designed specifically as an aftermarket part for the Trailblazer (and therefore the SSR) chassis. These are an improved version of the OEM Bilsteins. Price is for a pair.

  • Price: $175.30

BMR Lower Control Arms

BMR Lower Control Arms

Stock tubular steel control arms are sloppy. Bushing deflection combined with control arm flex creates erratic handling and inconsistent rear end stability when subjected to the additional loads of performance driving and racing.

  • Price: $159.75

BMR Upper Control Arms

BMR Upper Control Arms

Stock stamped steel control arms are marginal at best. Bushing deflection combined with control arm flex creates erratic handling and inconsistent rear end stability when subjected to the additional loads of performance driving and racing.

  • Price: $159.75

Eibach Pro Lowering Springs

Eibach Pro Lowering Springs

The Eibach Pro-Kit provides a 1" drop in the front and a 1.6" drop in the rear.  It will dramatically change the look of your SSR.  These are built especially for Simple Engineering. 

  • Price: $293.90

SSR / TBSS Front Frame Stiffening Plate

Poor Prototype Photos from cell phone. Better images coming

This stiffening plate bridges from the front crossmember under the crankshaft pulley to the main frame attach point that is even with the front tires. Steering response is improved and windshield "shake" is reduced.

  • Price: $254.88

LC32 Engine Crossmember Kit

LC32 Engine Crossmember Kit

Left Coast 32 builds these high quality crossmembers for the SSR and TBSS. These will replace the existing Crossmember under the oil pan.  Price includes shipping.

  • Price: $404.99